From mapalmer at fnal.gov Tue Jan 7 08:50:34 2014 From: mapalmer at fnal.gov (Mark A Palmer) Date: Tue, 7 Jan 2014 13:50:34 +0000 Subject: [MAP] MuPAC Review Connection Information Message-ID: <9F4CB924-5B01-416D-83C0-7BA78F4405DD@fnal.gov> Dear All, If you are interested in listening to any of the MuPAC presentations/discussion over the next couple days, the Indico site is: https://indico.fnal.gov/conferenceOtherViews.py?view=standard&confId=7851 Access Key: muons14 ReadyTalk connection information can be found in the materials at the top of the Indico page. Best, Mark Mark A. Palmer, Director, U.S. Muon Accelerator Program Fermilab, P.O. Box 500, MS221, Batavia, IL 60510-0500 Email: mapalmer at fnal.gov Voice: (630)840-4036 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140107/4ad74776/attachment.html From mapalmer at fnal.gov Tue Jan 7 16:16:07 2014 From: mapalmer at fnal.gov (Mark A Palmer) Date: Tue, 7 Jan 2014 21:16:07 +0000 Subject: [MAP] MuPAC Review Message-ID: <66FE1AE8-1F4E-400D-AAE5-525A82280C17@fnal.gov> All, Because we have had so many flight cancellations (both speakers and committee), we are streamlining the presentations into a single plenary session for the rest of the review. Please keep refreshing the Indico site to get the latest and look for sessions labelled: "REVISED PLENARY SCHEDULE" to get the updated talk times. The new single ReadyTalk connection uses: 1-866-740-1260 (for US & Canada) Access Code: 9789648 Best, Mark Mark A. Palmer, Director, U.S. Muon Accelerator Program Fermilab, P.O. Box 500, MS221, Batavia, IL 60510-0500 Email: mapalmer at fnal.gov Voice: (630)840-4036 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140107/845fe72a/attachment.html From mapalmer at fnal.gov Thu Jan 9 11:53:40 2014 From: mapalmer at fnal.gov (Mark A Palmer) Date: Thu, 9 Jan 2014 16:53:40 +0000 Subject: [MAP] Fwd: Delay closeout till 11:30 References: Message-ID: <95FDD6C4-06B2-40B1-8930-747666C1612B@fnal.gov> All, Our closeout will be held at 11:30 CST this morning. We will plan to use the same ReadyTalk connection as yesterday. Mark Begin forwarded message: From: "Raubenheimer, Tor O." > Subject: Delay closeout till 11:30 Date: January 9, 2014 9:20:50 AM CST To: "Crae S Tate (crae at fnal.gov)" >, Mark A Palmer > Hi Crae and Mark. I think we'll delay the closeout until 11:30. I expect that it will be ~30 minutes (maybe a bit longer). tor Mark A. Palmer, Director, U.S. Muon Accelerator Program Fermilab, P.O. Box 500, MS221, Batavia, IL 60510-0500 Email: mapalmer at fnal.gov Voice: (630)840-4036 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140109/f49c2a7b/attachment.html From mapalmer at fnal.gov Thu Jan 9 12:28:51 2014 From: mapalmer at fnal.gov (Mark A Palmer) Date: Thu, 9 Jan 2014 17:28:51 +0000 Subject: [MAP] Delay closeout till 11:30 In-Reply-To: <95FDD6C4-06B2-40B1-8930-747666C1612B@fnal.gov> References: <95FDD6C4-06B2-40B1-8930-747666C1612B@fnal.gov> Message-ID: All, Just to be explicit, here is the connection info: Phone number to call: 1-866-740-1260 Access Code: 9789648 Mark On Jan 9, 2014, at 10:53 AM, Mark A Palmer > wrote: All, Our closeout will be held at 11:30 CST this morning. We will plan to use the same ReadyTalk connection as yesterday. Mark Begin forwarded message: From: "Raubenheimer, Tor O." > Subject: Delay closeout till 11:30 Date: January 9, 2014 9:20:50 AM CST To: "Crae S Tate (crae at fnal.gov)" >, Mark A Palmer > Hi Crae and Mark. I think we'll delay the closeout until 11:30. I expect that it will be ~30 minutes (maybe a bit longer). tor Mark A. Palmer, Director, U.S. Muon Accelerator Program Fermilab, P.O. Box 500, MS221, Batavia, IL 60510-0500 Email: mapalmer at fnal.gov Voice: (630)840-4036 Mark A. Palmer, Director, U.S. Muon Accelerator Program Fermilab, P.O. Box 500, MS221, Batavia, IL 60510-0500 Email: mapalmer at fnal.gov Voice: (630)840-4036 -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140109/76e5fddd/attachment.html From diktys at bnl.gov Thu Jan 9 22:53:06 2014 From: diktys at bnl.gov (Diktys Stratakis) Date: Thu, 9 Jan 2014 21:53:06 -0600 Subject: [MAP] MAP Meeting Tomorrow Message-ID: Dear All, There will be a MAP meeting tomorrow January 10th @1pm (FNAL time). *AGENDA* *1. MUPAC Review Highlights* Speaker: Mark Palmer (FNAL) Detailed agenda can be found here: *https://indico.fnal.gov/conferenceDisplay.py?confId=7931 * For those at Fermilab, the room is WH 3NW ? Theory Regards, Diktys ------------------------------------------ Phone details: Ready Talk 866-740-1260 Access code: 5673390 (enter this code (or International code), followed by ?#?) The international Toll-Free Numbers can be found at: http://www.readytalk.com/intl International Toll Number: 303-248-0285 -- Diktys Stratakis, Ph. D. Assistant Physicist Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973 Web: https://pubweb.bnl.gov/~diktys/ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140109/d14a172e/attachment.html From tjrob at muonsinc.com Mon Jan 13 11:19:39 2014 From: tjrob at muonsinc.com (Tom Roberts) Date: Mon, 13 Jan 2014 10:19:39 -0600 Subject: [MAP] G4beamline release 2.16 is now available Message-ID: <52D4121B.8090900@muonsinc.com> This new release has many new features including boolean operations among solids and tessellated solids; it also has a new 'detector' command that outputs the energy deposited in the detector into the NTuple. You can download it from: http://g4beamline.muonsinc.com There are still compiler issues at NERSC that prevent it from running on either Hopper or Edison. I am working on them. I do not expect these to require changes to G4beamline itself, just to the scripts that set it up at NERSC -- three weeks ago it built and ran fine on both supercomputers. It has not yet been installed on FermiGrid. Tom Roberts From tjrob at muonsinc.com Tue Jan 14 12:58:41 2014 From: tjrob at muonsinc.com (Tom Roberts) Date: Tue, 14 Jan 2014 11:58:41 -0600 Subject: [MAP] G4beamline release 2.16 is now available on Hopper Message-ID: <52D57AD1.3000907@muonsinc.com> With assistance from the NERSC consultants, the compiler issue at NERSC has been resolved without any changes to the G4beamline source. G4beamline 2.16 is now available on Hopper; it passes all regression tests on a worker node, including MPI. To use it (bash): source /project/projectdirs/map/bin/g4bl_latest.sh ... use g4blmpi as usual There are also setup scripts for specific versions of G4beamline; older versions remain usable by simply source-ing the appropriate script. NOTE: these setup scripts work only for bash. If you want to use some other shell, you'll have to re-implement the scripts for it (the scripts in G4beamline itself are OK, just the MAP setup scripts need to be re-implemented). Possibly you could run bash, source the script, and then run your shell; I haven't tried that. I'm working on Edison now, and will send out another email when it is ready.... This new release has many new features including boolean operations among solids and tessellated solids; it also has a new 'detector' command that outputs the energy deposited in the detector into the NTuple. You can download it from: http://g4beamline.muonsinc.com There are still compiler issues at NERSC that prevent it from running on either Hopper or Edison. I am working on them. I do not expect these to require changes to G4beamline itself, just to the scripts that set it up at NERSC -- three weeks ago it built and ran fine on both supercomputers. It has not yet been installed on FermiGrid. Tom Roberts From tjrob at muonsinc.com Tue Jan 14 16:36:35 2014 From: tjrob at muonsinc.com (Tom Roberts) Date: Tue, 14 Jan 2014 15:36:35 -0600 Subject: [MAP] G4beamline release 2.16 is now available on Edison and Hopper Message-ID: <52D5ADE3.2010106@muonsinc.com> G4beamline 2.16 is now available on both Edison and Hopper at NERSC. Do this (bash) on either machine: source /project/projectdirs/map/bin/g4bl_latest.sh ... use g4blmpi as usual The bug that caused g4bl_latest.sh to fail on compute nodes has also been fixed. Tom Roberts ---- previous message ---- With assistance from the NERSC consultants, the compiler issue at NERSC has been resolved without any changes to the G4beamline source. G4beamline 2.16 is now available on Hopper; it passes all regression tests on a worker node, including MPI. To use it (bash): source /project/projectdirs/map/bin/g4bl_latest.sh ... use g4blmpi as usual There are also setup scripts for specific versions of G4beamline; older versions remain usable by simply source-ing the appropriate script. NOTE: these setup scripts work only for bash. If you want to use some other shell, you'll have to re-implement the scripts for it (the scripts in G4beamline itself are OK, just the MAP setup scripts need to be re-implemented). Possibly you could run bash, source the script, and then run your shell; I haven't tried that. I'm working on Edison now, and will send out another email when it is ready.... This new release has many new features including boolean operations among solids and tessellated solids; it also has a new 'detector' command that outputs the energy deposited in the detector into the NTuple. You can download it from: http://g4beamline.muonsinc.com There are still compiler issues at NERSC that prevent it from running on either Hopper or Edison. I am working on them. I do not expect these to require changes to G4beamline itself, just to the scripts that set it up at NERSC -- three weeks ago it built and ran fine on both supercomputers. It has not yet been installed on FermiGrid. Tom Roberts From diktys at bnl.gov Thu Jan 16 16:08:55 2014 From: diktys at bnl.gov (Diktys Stratakis) Date: Thu, 16 Jan 2014 16:08:55 -0500 Subject: [MAP] No MAP Meeting Tomorrow Message-ID: Dear All, There is no MAP Meeting tomorrow. Our next meeting will be on Jan. 24th. Regards, Diktys -- Diktys Stratakis, Ph. D. Assistant Physicist Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973 Web: https://pubweb.bnl.gov/~diktys/ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140116/5510063c/attachment.html From diktys at bnl.gov Fri Jan 24 09:07:29 2014 From: diktys at bnl.gov (Diktys Stratakis) Date: Fri, 24 Jan 2014 09:07:29 -0500 Subject: [MAP] No MAP Meeting Today Message-ID: Dear All, There is no MAP Meeting today. Our next meeting will be on Jan. 31st. Regards, Diktys -- Diktys Stratakis, Ph. D. Assistant Physicist Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973 Web: https://pubweb.bnl.gov/~diktys/ -------------- next part -------------- An HTML attachment was scrubbed... URL: https://lists.bnl.gov/mailman/private/map-l/attachments/20140124/c882909e/attachment.html